pdlux PD-MV1018A Instructions

PD-MV1018A Microwave Sensor Instruction
Summary
This is a hi-precision digital microwave sensor whose detection range is 360°and working frequency is
5.8GHz. It is based on Doppler principle which integrates the emitting and receiving. It adopts MCU (Micro
Control Unit) that greatly increases its precision and decreases its fault rate. It's delicate in appearance and
compact in structure. It can be independently connected to the loads or easily installed inside the lightings with
lampshade made of glass or plastic. It is widely applied in the passageway, washroom, elevator, household or
other public areas for security protection or energy saving. It applies for several technical patents and is the
perfect choice for your intelligent living.
Features
1.Non-radiation harm: its transmitter power is lower than 0.3mW, which does no harm to human body.
2.Reliable & Stable performance: it applies the RC filtering and digital filtering in digital processing. It also uses
the digital zero trigger technology, that is, at zero point it will be auto-connected or auto-disconnected. It uses
the Tyco high-power relay to control output, which ensures its reliable performance. It adopts power
management chip to guarantee its stable performance in 100-240VAC.
Specifications
Power source: 100-240VAC
Power frequency: 50/60Hz
Rated load:1600W Max.tungsten (220-240VAC)
400W Max.fluorescent & LED (220-240VAC)
1000W Max.tungsten (100-130VAC)
250W Max.fluorescent & LED (100-130VAC)
Transmission power: <0.2mW
Working temperature: -15°C~+70°C
Sensor information
Height of installation2.5-4.5M
Protection level: IP20,Class II
Time setting: 8sec to 12min (adjustable)
Detection angle: 360°
Detection range: 2-10m(radii.) (adjustable)
Light-ontrol: 2-2000LUX (adjustable)
Installation sit: indoors, ceiling mounting
HF system: 5.8GHz CW electric wave,ISM band
Min:2m Min:2m
Max:10m
Sensing distance adjustment range
68mm
43.7mm
60.7mm
Max:10m
Sensing angle adjustment range
50mm
360º