Advertisement
Quick Links
(Translucence)
Specifications
Power source: 90-240V/AC
Power frequency: 50/60Hz
Transmission power: <0.2mW
Rated load:
1200W/5A,Max,tungsten(cosφ=1)(220-240V/AC)
300W/2.5A,Max,fluorescent(cosφ=0.5)(220-240V/AC)
600W/5A,Max,tungsten(cosφ=1)(100-130V/AC)
150W/2.5A,Max,fluorescent(cosφ=0.5)(100-130V/AC)
NOTE:
the high-frequency output of this
sensor is <0.2mW- that is just one 5000 of the
transmission power of a mobile phone or the
output of a microwave oven.
Sensor information
Height of installation2.5~3.5M
Utilizing field and introduction
PD-MV1007A is a moving object sensor that can detect range of 360° and it's working frequency is 5.8G.The
advantage of this product is stable working state (stable working temperature: -15°C~+70°C), PD-MV1007A
adopts a microwave sensor(high-frequency output<0.2mW),so that it is safe and performs better than infrared
sensor.
www.pdlux.com
Microwave Sensor
(Transparent)
th
Max:10m
(Height of installation2.5~3.5M)
Sensing distance adjustment range
Tel: 86-574-83008608
PD-MV1007A instruction
Installation sit: ceiling mounting
HF system: 5.8GHz CW electric wave，ISM band
Working temperature: -15°C~+70°C
Detection angle: 360°
Detection range: 2m-5m-8m-10m (radii.), adjustable
Time setting: 6sec-1min-3min-5min-10min-15min,adjustable
Light-control: <10LUX-100LUX-300LUX-2000LUX,adjustable
Power consumption: approx.0.5W
Transmission power<0.2mW
Max:10m
Min:2m
Min:2m
360º
Sensing angle adjustment range
mm
Advertisement
Related Manuals for pdlux PD-MV1007A
Summary of Contents for pdlux PD-MV1007A
- Page 1 Height of installation2.5~3.5M Utilizing field and introduction PD-MV1007A is a moving object sensor that can detect range of 360° and it’s working frequency is 5.8G.The advantage of this product is stable working state (stable working temperature: -15°C~+70°C), PD-MV1007A adopts a microwave sensor(high-frequency output<0.2mW),so that it is safe and performs better than infrared sensor.
-
Page 2: Installation
Microwave Sensor PD-MV1007A instruction Installation 1． Through the buckle under cover(see fig.1)(fig2) 2． Hold base against the Ceiling and mark drill holes, paying attention to any existing wiring in the Ceiling; 3． Drill the holes, insert wall plugs (6mm dia.);(see fig.4);... -
Page 3: Time Setting
PD-MV1007A instruction If you want PD-MV1007A to detect small zone, you can just adjust the sense sliding controller SENS to the range that you need (You may need to adjust some times untill you think it is suitable).If you want that the light... -
Page 4: Troubleshooting
Microwave Sensor PD-MV1007A instruction Solutions of prevent the power network pulse interference the products: Due to the difference of regional interference power network, the pulse of interference is uncertain,so the user are not suggested to adjust the sensitive to the maxium when using. - Page 5 Microwave Sensor PD-MV1007A instruction Warning! The detection distance may multiply for the reflection on microwave electromagnetic field by the metal or glass materials. Thus, lower the sensitivity to reach the appropriate detection distance. Never turn the SENS knob to the maximum value to avoid error detection. Also the surrounding environment will lead to error action, e.g.