Installation
1
Installing the crossbar assembly
□
Secure the crossbar assembly (AA) to the outlet box (not
included) with the outlet box screws (BB). Tighten until
snug.
NOTE: The preassembled mounting screws on the
crossbar should protrude outward.
2
Testing the backplate fit to the crossbar assembly
□
Remove the mounting balls (1) from the crossbar assembly (AA).
□
Fit the backplate on the fixture body (A) to the crossbar assembly (AA) and secure with the mounting balls (1).
□
If they do not align, adjust the length of the mounting screws on the crossbar assembly (AA) by unscrewing the preassembled hex
nuts.
□
Screw the mounting screws in or out of the crossbar assembly (AA) until the desired length is achieved.
□
Once the backplate on the fixture body (A) is secure, remove the mounting balls (1) and the fixture body (A) and proceed to Step 3.
NOTE: The backplate on the fixture body (A) should be snug
against the wall and the mounting balls (1).
AA
5
Please contact 1-855-HD-HAMPTON for further assistance.
Outlet box
AA
A
1
BB
HAMPTONBAY.COM