Table of Contents
Advertisement
HHa
, HHa-941, HHa/E01, HHa/E02, HHa/E06, HHa/E07, HHa/E07-941, HHa/X
Firmware Update
Updating the firmware is a simple matter of download-
ing a utility program and file from the website and run-
ning the program on a Windows operating system
with the transmitter connected to a computer via the
USB port.
Go to www.lectrosonics.com/US. In the top menu,
hover the mouse over Support, and click on Wireless
Support. On the right-hand-side Wireless Support
Menu, choose Wireless Downloads. Choose your prod-
uct (HHa), then choose Firmware.
Step 1:
Begin by downloading the USB Firmware Updater
Program.
14
Step 2:
Next, test the Updater by opening the icon:
driver opens automatically, proceed to Step 3.
WARNING: If you receive the following error, the
Updater is not installed on your system. Follow the
TROUBLESHOOTING steps to fix the error.
TROUBLESHOOTING:
Then click here to download.
NOTE: This website, http://www.ftdichip.com/
Drivers/D2XX.htm, is not associated with
Lectrosonics.com. It is a third party site used
only for D2XX drivers currently available for
Lectrosonics' devices' upgrades.
If the
If you
receive the
FTDI D2XX
error shown
above,
download
and install
the driver by
clicking on
this link.
LECTROSONICS, INC.
Advertisement
Table of Contents
Need help?
Do you have a question about the HHa-941 and is the answer not in the manual?
Questions and answers