SMC Networks ISE79S L2 Series Operation Manual page 32

Hysteresis setting
Set the pressure referring
to the setting method on
page 22.
Hysteresis mode: [H_1]
Window comparator mode: [WH1]
The snap shot function can be used.
(Refer to page 56)
Press the SET button to set.
Delay time setting
Set the delay time referring
to the setting method on
page 24.
Press the SET button to set.
Display colour setting
Press the UP or DOWN button to select the display colour.
Press the SET button to set.
1: Selected item becomes valid after pressing the SET button.
2: After enabling the setting by pressing the SET button, it is possible to return to the measurement mode by keeping pressing the
SET button for 2 seconds or longer.
Move on to delay time setting.
Move on to display colour setting.
Return to function selection mode.
[F 1] Setting of OUT1 completed
-31-
No.PS※※-OMY0007-B