SMC Networks ISE79S L2 Series Operation Manual page 28

●[F 2] Setting of OUT1
Item
Either hysteresis mode, window comparator mode, error output or
Output mode
switch output OFF can be selected.
Reversed output Selects which type of switch output is used, normal or reversed.
Pressure setting Sets the ON and OFF point of the switch output.
Appropriate setting of the hysteresis will prevent the switch output
Hysteresis
from chattering.
Delay time Delay time of the switch output can be selected.
Display colour Select the display colour.
●Other parameter settings
Item
[F 3] Digital filter setting
[F 4] Auto-preset
[F 6] Fine adjustment of display value
[F10] Sub display setting
[F11] Display resolution setting
[F14] Zero cut-off setting
[F80] Power saving mode
[F81] Security code
[F90] Setting of all functions
[F96] Number of pressurizing errors
[F98] Output check
[F99] Reset to default settings
Page 33
Explanation
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
-27-
Default setting
35
36
38
39 std (Standard)
45 1000 (display up to one decimal point)
46
47
48
50
52
53 N/A (normal output)
55
Default setting
Hysteresis mode
Normal output
ISE79S: 25.0 MPa
ISE79S: 2.5 MPa
0.00 sec.
Output ON: Green
Output OFF: Red
(Linked to OUT1)
0.00 ms
OFF
0.0%
0.0
OFF
OFF
OFF
―
OFF
No.PS※※-OMY0007-B