SMC Networks ISE70G L2 Series Operation Manual page 32

Setting of diagnostic information selection
It is possible to set the condition in which the diagnostic information of the
process data can be transferred to the upper devices such as a master.
: IO-Link mode can provide the communication function.
: Refer to page
64 for details of the diagnostic information.
Press the SET button to set.
[F 0] Setting of the display units, switch output specifications and
●Available display unit and minimum set value
Unit ISE70G
MPa 0.001
kPa
2
kgf/cm 0.01
bar 0.01
psi 0.1
diagnostic information selection function is completed.
ISE75G ISE76G
1
0.2
Return to function selection mode.
ISE77G ISE78G
0.01
-
0.1
0.1
1
-31-
No.PS※※-OMV0009-F