SMC Networks ISE70G L2 Series Operation Manual page 27

In the window comparator mode, set P1L, the lower limit of the switch operation, and P1H, the upper limit of
the switch operation, WH1 (hysteresis) and dtH/dtL (delay time) following the instructions given on page 25.
(When reversed output is selected, the sub display (left) shows [n1L] and [n1H].)
Please refer to the "List of output modes" on page 34 for the relationship between the set values and
operation.
: Set OUT2 in the same way.
-26-
No.PS※※-OMV0009-F