Maintenance - Ispring WHOLE HOUSE WF150K Installation Instructions & User Manual

c. Advanced Options
Press and hold "UP" and "DOWN" at the same time for 3 seconds to enter.
Press "Set/Regen" to confirm and switch to the following parameter setting, the entire menu
shown below. Use the "UP" and "DOWN" buttons to modify the value. Press the "Menu" button
to return to the standby state immediately.
d. Regeneration Mode Options
Press ''SELECT'' button once to enter ''DELAYED REGEN.'' function. Use the"↑" and "↓" button
to change the mode. Press ''SELECT'' to confirm the setting.Press the ''SETTING'' button to
immediately return to the standby state.
Press and hold the "SELECT" button for 3 seconds to enter the ''REGENERATION'' setting. Use
the"↑" and "↓" button to switch the modes. Press ''SELECT'' to confirm the setting. Press the
''SETTING'' button to immediately return to the standby state.
•
Regularly get your water tested to ensure the system is working properly.
•
Media needs to be refilled only when the system reaches capacity or accidentally gets
contaminated. The media replacement process needs to be conducted with a professional or under
professional guidance. For related questions, contact the iSpring Customer service team.
•
Systems installed outdoors without regular maintenance will fail sooner than those installed
indoors. It is recommended that you check the product and maintain it regularly. Call us
immediately if anything goes wrong.
•
Do not operate this equipment if you have not read and truly understood this manual.
www.123filter.com
BA. WA. DURATION (BACKWASH DURATION) / RINSE
DURATION:
Users can adjust these parameters at any time with the help of an
application engineer based on the water environment.
LOCK VALUE:
This setting locks the value set on this previous page, and the end-
user will not be able to modify it before this setting is changed to
UNLOCK.
DELAYED REGENERATION
In this mode, the system will start a regeneration at the next
regeneration time regardless of the remaining regeneration days
or water consumption.
IMMEDIATE REGENERATION
Under this mode, the system immediately starts a regeneration.
VACATION MODE
Choose vacation mode and input estimated holiday days; the
valve will regenerate in a SMART CLEAN mode. The system
will remain in vacation mode when no water is used during the
input estimated holiday days; if there's water used, the vacation
mode will be auto-off, and the system will return to the normal
working mode.

Maintenance

| +1 (678) 261-7611 | support@123filter.com Page 13