Related Manuals for Ispring WSP-ARB
Summary of Contents for Ispring WSP-ARB
- Page 1 Automatic Flush Module Installation and User Manual Ver.04/2019 Copyright ©2005-2019 ISPRING WATER SYSTEMS, LLC. All rights reserved.
- Page 2 Introduction This product is designed for use with the iSpring WSP-ARB spin down pre-filtration system.It enables the system to flush automatically on a preset schedule. Product Features • HD touch screen • 3 flush modes (auto, semi-auto, manual) • Installs in seconds •...
- Page 3 Step 1:Make sure the ball valve switch is closed(in a level position). Step 2: Remove the circlip and the ball valve knob. Step 3: Install the battery or plug in the power supply. Insert the unit and make sure the ball valve switch is aligned with the slot on the controller.Place the circlip back on the unit to secure the connection.
- Page 4 Trouble shooting Error Code Cause Solution No power(when running in Replace the battery battery only mode) Ball valve cannot be opened fully Restart the system Ball valve cannot be closed fully Restart the system CUSTOMER SATISFACTION AND WARRANTY REGISTRATION To register your product for the warranty, please visit our website at 123filter.com and go to the “Warranty Registration”...