M48192
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Keep these instructions in
a safe place for future reference.
INTENDED USE
To provide stable support to aid adult users (taller than 1.46 m) transfer in and out of bed, moving from a
lying to a sitting position as well as assist user repositioning. For use with solid base divan beds and framed
beds with fixed slats. Suitable for all bed sizes from single to king-size, it can also be fitted to super king-size
beds with additional straps (refer to Accessories & Spares Parts).
SAFETY
318mm
Min
WARNING: To avoid possible entrapment, you must
always position the product a minimum of 318 mm
from the headboard or footboard.
WARNING: To
prevent
hazards, we recommend that you install the product
at least 318 mm away from any adjacent bedside
furniture. Where this is not possible, the prescriber
must do a risk analysis.
WARNING: The maximum user weight must not be
more than 160 kg (25 st).
YOU MUST carry out a risk assessment to assess
the use and suitability of the bed rail in relation to the
users physical and cognitive ability, as well as the
surrounding environment.
2 in 1 Bed Rail Mk2
additional
entrapment
USER INSTRUCTIONS
2 IN 1 BED RAIL Mk2
DO NOT install this product to a damaged bed.
MAKE SURE there is no gap between the bed rail
and the mattress.
ALWAYS use the bed securing straps provided
when fitting to a divan bed.
REGULARLY check the straps are tight and the
device is stable and firmly fitted.
DO NOT fit this product to profiling or medical beds.
WE DO NOT recommend fitting this product to
sprung divans or framed beds with non-fixed slats,
unless a suitable risk assessment has been done.
UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are
missing or damaged and do not try and assemble.
Contents:
1.
Hand Rail x 1
2.
Bed Rail Board x 1
3.
Bed Straps x 2
4.
E-Clips x 2
1
Maximum User Weight
25st
160kg
1
4
2
3