P63991
EasyFit Plus Bed Rail MK2 - Standard
General Safety Warning
Please make sure that you read and follow these
instructions carefully. Keep these instructions in a
safe place for future reference.
1.
INTENDED USE
To provide stable support to aid adult users (taller than 1.46 m) transfer in and out of bed, moving from a lying to a
sitting position as well as assist user repositioning. Designed for use with most types of domestic beds including;
divans with feet / castors, framed slatted beds and electric profiling beds.
2.
SAFETY
318mm
Min
WARNING: To avoid possible entrapment, you must
always position the product a minimum of 318 mm from
the headboard or footboard.
WARNING: To prevent additional entrapment hazards,
we recommend that you install the product at least
318 mm away from any adjacent bedside furniture. Where
this is not possible, the prescriber must do a risk analysis.
WARNING: To prevent hand entrapment do not hold the
grab rail when altering the profile of the bed.
WARNING: The maximum user weight must not be more
than 160 kg (25 st).
YOU MUST carry out a risk assessment to assess the
use and suitability of the bed rail in relation to the users
physical and cognitive ability, as well as the surrounding
environment.
DO NOT install this product to a damaged bed.
ALWAYS check the profiling operation of the bed with the
grab rail already fixed in position, for any potential risks
prior to use.
USER INSTRUCTIONS
EASYFIT PLUS BED RAIL MK2
P64004
ALWAYS make sure that the mattress is as close as
possible to the bed rail. Any gap could allow the client to
become wedged in-between.
DO NOT use on electrically height adjustable beds unless
the height adjustment function has been disabled, as this
could damage the bed rail and / or the bed frame when
operated.
ALWAYS make sure the bed rail is firmly clamped to
the bed frame. Check regularly to ensure the bed rail is
securely clamped.
ALWAYS detach the handrail from the base before
carrying or storing the product.
3.
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are missing or
damaged and do not try and assemble.
3.1
1.
2.
Recommended Bed Rail Heights
NRS recommends fitting the standard bed rail (P63991)
on beds with a mattress height up to 600 mm; for higher
beds, the tall bed rail (P64004) should be used.
1
EasyFit Plus Bed Rail MK2 - Tall
Maximum User Weight
25st
160kg
UNPACKING
Contents:
Base Frame x 1
Handrail Assembly x 1
P64004 (Tall) for
beds heights more
than 600 mm (24")
P63991 (Standard) for
beds heights less than
600 mm (24")
Need help?
Do you have a question about the EASYFIT PLUS BED RAIL MK2 and is the answer not in the manual?
Questions and answers