NRS Healthcare M48805 User Instructions

General safety Warning
Please ensure these instructions are fully read
and implemented. Failure to do so may result
in injury. Retain this instruction manual in a
safe place for future reference.

1.0 Intended Use

The Mowbray toilet frame and seat is designed
to assist those who have difficulty in lowering
onto and rising from a standard toilet. The
plastic moulded seat offers support in a natural
position and the frame is height adjustable.

2.0 Safety Precautions

Avoid extending the legs in a manner which
causes the seat to be on a slant.
Do not exceed the maximum user weight of
40st 254kg.
Avoid using the product on a wet or slippery
floor.
Do not attempt to stand on the frame or seat.

3.0 Unpacking

Remove all packaging and check all parts are
present and undamaged. Any suspected faults
or damage should immediately be reported to
the supplier and the product taken out of
action.
Spare and replacement parts are available for
this product, contact customer services.
Mowbray Toilet Frame & Seat Extra Wide
M48805 – Mowbray Frame & Seat Extra Wide
M48817 – Mowbray Frame & Seat Extra Wide – Floor Fixed
User Instructions
Maximum User Weight

4.0 Installation

Please note: The free standing versions
of this product are delivered ready
assembled.
assembled, please follow instructions.
Fit the moulded toilet seat to the frame by
clipping onto the front and back cross
tubes as shown in the picture above.
To adjust the height:
 Remove the 'e-clips', slide the legs
to the desired height, align the
holes and re-insert the 'e-clips'.
Position frame around toilet.
Model M48817 only, secure the frame to
the floor by screwing down the fixing legs.
254kg
If your product
40st
is not