Table of Contents
Advertisement
22
en | First time operation
5.2
Quick menu
When in live viewing mode, right-click the mouse for the Quick menu. Options here are:
View 1, 4, 8, 9, 16, 32 - choose here the number of view windows shown on Monitor A (one-
window, four-windows, nine-windows, 16-windows or 32-windows). For each window view,
select also which channels (cameras) to display
View monitor B (optional) - a popup appears where you can assign the view windows and
channels for images to be shown on monitor B
Assign camera - assign the 1
Save View - save the current layout of view windows in a new view or overwrite an existing
view
Pan/Tilt/Zoom - only possible if you have a PTZ camera attached and configured
Dewarping - only possible if you have a panoramic camera attached and configured
–
–
–
Search/Play - search for records, and play/export them
Event search - search for events (alarms), and play/export them
Snapshot - make a snapshot of the current live camera images:
–
–
Sequence on - activate a camera tour sequence on Monitor A (to disable the sequence, access
Quick Menu again and select 'Sequence off')
Alarm output - access the alarm output screen to configure the alarm output relays
Logout user - logout the current user (a popup appears to confirm logout)
Main menu - for settings and user modes
Notice!
The Pan/Tilt/Zoom setting applies for the currently selected channel. If you are in multiple-
window mode, the system automatically switches to the corresponding channel.
2020-05 | V4.0 | AM18-Q0712
Snapshot
Remote (not
shown in hybrid
models)
Choose: OFF, PTZ, Double panoramic, Corridor or Quad for dewarping in the recorder.
If the camera supports it choose: Dewarping in camera or PTZ in camera
Save, Load or Delete a dewarping view
A disclaimer screen may initially appear when you select Snapshot (click <Accept> to
continue).
Choose to export the snapshot to an email address, a USB memory device, and/or a DVD.
2.
Hold down the left mouse button while selecting a screen
area.
3.
Release the button to zoom in on the selected area.
4.
Right-click the mouse to exit the zoomed area.
5.
Exit the zoom function by clicking on the icon again – it will
change back to
Make a snapshot of the current channel display. The system will
ask to export the snapshot to an email address, a USB memory
device, and/or a DVD:
Note: A disclaimer screen may initially appear when you first
select Snapshot (click <Accept> to continue).
Directly open the camera configuration screen to assign a (new)
IP camera to this channel.
st
nd
or 2
stream of a camera to the selected view window
Installation manual
DIVAR 2000 | DIVAR 3000 | DIVAR 5000
.
Bosch Security Systems B.V.
Advertisement
Table of Contents
