Installation; Unpacking; Package Contents - Bosch DIVAR hybrid 3000 Installation Manual

Network/hybrid recorder
Table of Contents

Advertisement

10
en | Installation
4

Installation

Notice!
Use proper surge suppression on cables that are routed outdoors, or close to large inductive
loads or electrical mains supply cables.
Caution!
Installation should only be performed by qualified service personnel in accordance with the
!
National Electrical Code (NEC 800 CEC Section 60) or applicable local codes.
To get the unit operational, perform the following quick install steps:
1.
2.
3.
4.
5.
After completing this initial setup, the system is ready to run and will show a live view of the
camera image(s). If required, you can alter the settings later using the menus and/or factory
defaults, or you can run the Startup wizard again.
4.1

Unpacking

This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all parts are included. If any items are missing, notify your Bosch Security Systems
Sales or Customer Service Representative.
The original packaging is the safest container in which to transport the unit and can be used if
returning the unit for service.
4.1.1

Package contents

2020-05 | V4.0 | AM18-Q0712
Carefully unpack the recorder from its shipping packaging – see Unpacking.
Make all required hardware connections – see 'Make Connections'.
Power up the system – see Powering Up.
Log in – see Login.
Correctly configure your system software with the Startup wizard (this appears the first
time the unit is started) – see Startup Wizard.
Qty
Component
1
Recorder
1
Optical disc containing software licenses and user documentation
2
Power supply cables (120VAC US type; 230VAC Euro type)
1
External power supply adapter (only for DIVAR 2000/3000 network (non-PoE)
models and DIVAR 3000 hybrid models)
Terminal connector blocks
1
19" mounting set including brackets and screws (only on DIVAR 5000 models)
1
Hard disk mounting kit (including SATA cables, brackets and screws)
1
Optical USB mouse
1
IR remote Control with 2 AA (1.5 V) batteries
1
Ground screw
Installation manual
DIVAR 2000 | DIVAR 3000 | DIVAR 5000
Bosch Security Systems B.V.

Advertisement

Table of Contents
loading

Table of Contents