Table of Contents
Advertisement
Terminal Commands
Specify Character Enlargement
Normal Display
Set Inverse Display
230
Format
m
: Character enlargement
1
Description
All text and marks sent after this command are displayed in the specified size.
Reference:
The character string is specified with the Specify Displayed Characters Com-
mand (refer to Specify Displayed Characters).
The enlargement specified with this command remains valid until the screen
display is switched or another enlargement is specified with the command.
The default enlargement is no enlargement.
Format
Description
Cancels all display attribute settings (inverse, flashing, flashing inverse) for
characters and marks so that all characters are displayed as "normal" charac-
ters (not inverse or flashing).
Format
Description
Sets the display attribute to inverse so that all characters and marks sent sub-
sequently are highlighted. Other attributes remain unchanged.
Reference:
The Set Inverse Display Command is cancelled by the End Inverse Display
Command or the Normal Display Command.
The setting with this command remains valid until the screen display is
switched or another display attribute setting is made. The default display
attributes are set to a normal display when a screen is initially displayed.
Use this command with the Set Flashing Display Command (refer to Set
Flashing Display) to produce a flashing inverse display.
[ESC]
*
1B
2A
0 (30
): No enlargement
H
1 (31
): Enlarge height x 2
H
2 (32
): Enlarge width x 2
H
3 (33
): 2 x 2 enlargement
H
4 (34
): 3 x 3 times enlargement
H
5 (35
): 4 x 4 times enlargement
H
[ESC]
!
1B
21
[ESC]
"
1B
22
Section 6-7
m
1
* *
Advertisement
Chapters
Table of Contents
