Table of Contents
Advertisement
Controlling the NT20 Status
Buzzer Control
System Menu Display Permission
228
Format
m
: Buzzer status
1
Description
Controls the NT20 buzzer.
Reference:
The buzzer turned on with this command can be stopped with a Buzzer con-
trol command, press the "buzzer stop" touch switch on the screen, or by dis-
playing a screen with no buzzer attributes.
Format
m
: System menu display permission/inhibition
1
0 (30
1 (31
Description
System menu is displayed when "display permitted" is set, and from the sys-
tem menu, selection of transmit mode or maintenance mode is possible. If
"display inhibited" is set, the system menu is not displayed.
Turning off the power or resetting operation validates the settings made with
the DIP switch (SW2-3) on the NT20.
[ESC]
T
1B
54
0 (30
): Buzzer off
H
1 (31
): Continuous buzzer
H
2 (32
): Short intermittent buzzer
H
[ESC]
1B
): Display permitted
H
): Display inhibited
H
Section 6-6
m
1
* *
W
m
1
57
* *
Advertisement
Chapters
Table of Contents
