Omron NT20S-ST121B-EV3 User Manual page 180

Numeral Setting
Numeric Key Allocations
The display position and arrangement of the numeric keys can be set as
required by allocating them to touch switches (see page 142).
Tank A Tank B Tank C
When the numeral setting attribute is set to "user", numeric keys are cre-
ated by using the control keys of the "input key" function. In addition, by us-
ing the character keys of the "input key" function, the one-byte characters
0 to 9 and A to F can be used as numeric keys.
Note Even when the numeral setting attribute is set to "user", the same
numeric keys as displayed with the "system" attribute can be dis-
played.
If "User" is selected for "Keypad" during data creation on the numer-
al setting screen, the numeric keys shown below are displayed.
The numeric keys are allocated to touch switches.
The numeric keys allocated to touch switches are specified when the touch
switches are created. The following numeric keys (system keys) can be used
for numeral setting.
For details on how to create touch switches, refer to 4-7 Touch Switches on
page 152.
Touch Numeric
Switch Key
Number
*
Menu
227 ( )
display
228
229
230
231 0
232 1
233 2
234 3
235 4
236 5
(*) Numeric key number 227 is the system menu display key.
Tank A Tank B Tank C
1 2 3 4 5
7 8 9 0 CLR
Touch Numeric
Switch Key
Number
237 6
238 7
239 8
240 9
241 A
242 B
243 C
244 D
245 E
246 F
Section 4-8
6
±
Touch Numeric
Switch Key
Number
247 CLR
248 ±
249 .
250 HOME
↑
251
↓
252
←
253
→
254
255
159