Omron NT20S-ST121B-EV3 User Manual page 246

Lamps, Touch Switches, Numeral Setting
Four-digit Number Input Notify
!Caution This command cannot be used for negative numbers. Always set "8" as the
Eight-digit Number Input Notify
n
When a touch switch is pressed, the NT20 sends a Touch Switch Number
Output Command or Touch Switch Bit Output Command to the host. The
command sent depends on the set screen attributes.
Format
[ESC] E
1B 45
d d d : Numeral memory table entry number to which number was input
1 2 3
(3-digit hexadecimal) 000 to 07F
n n n n : Input number data (4-digit BCD)
1 2 3 4
Description
A number with 4 transferred digits set with the NT20 number setting function
is reported to the Host with this command.
number of transferred digits when negative numbers may be input.
Format
[ESC] F
1B 46
n n
6 7
* * * *
d d d :
Numeral memory table entry number to which number was input
1 2 3
(3-digit hexadecimal) 000 to 07F
n n n n n n n : Input number data (8-digit BCD)
1 2 3 4 5 6 7 8
Description
A number with 8 transferred digits set with the PT number setting function is
reported to the Host with this command.
When a negative number is written, n1 becomes "F" (46H) and the number
comprises 7 digits.
d d d n
1 2 3 1
* * * * * * * *
d d d n
1 2 3 1
* * * * * * * *
n [CR]
8
* * 0D
Section 6-5
[CR]
n n n
2 3 4
0D
* * * * * *
(0 to 127)
H
n n n n
2 3 4 5
* * * * * * * *
(0 to 127)
H
225