Omron NT20S-ST121B-EV3 User Manual page 122

Setting the Conditions of Communications with the Host by Using the Memory Switches
Note
• Flow Control: None/RS/CS/XON/XOFF
• Baud Rate: 2400 bps/4800 bps/9600 bps/19200 bps
• LMP Bit Control: Enable/Disable
Use the same condition settings as set for the host. It is recommended that
the highest baud rate possible is selected for both the host and the NT20.
For details on lamp bit control, refer to 3-8 Various System Settings on page
page 106.
Section 3-5
101