Selecting System Mode - Honeywell TH6320ZW2003 User Manual

Selecting system mode

Current system mode (Heat, Cool, Off, Em
Heat) is displayed to the left of current indoor
temperature on the thermostat home screen.
The mode that's currently running (Heat On, Cool
On, Em Heat On) is displayed in the upper-left
corner of the thermostat home screen.
To cycle through the available modes, touch Mode
on the thermostat home screen and select the
appropriate mode for your desired temperature.
• Heat: Controls the heating system.
• Cool: Controls the cooling system.
• Off: Turns the heating and cooling systems
off.
• Auto: When enabled, the thermostat will
automatically use heating or cooling to reach
the desired temperature.
• Em Heat: Controls auxiliary or emergency
heat; only available on systems with a heat
pump.
Notes:
• Em Heat and Auto modes may not appear
on the thermostat screen depending on your
equipment and how your thermostat was
installed.
• Em Heat is only available for heat pump
systems. The thermostat must also be
configured to control a heat pump and an
auxiliary/emergency heat stage.
• When Auto mode is selected, Auto Chg. On
will appear in the upper-right corner of the
thermostat home screen, and the active mode
(Heat or Cool) will display under Mode. To set
your temperature preferences in Auto mode,
see page 6.
7
AM
Following Schedule
Mode Fan
Heat Auto
Away Home Sleep
Mode Menu Fan
AM
Following Schedule
Mode Fan
Auto
Cool
Away Home Sleep
Mode Menu Fan
AM
Following Schedule Auto Chg. On
Mode Fan
Auto
Away Home Sleep
Mode Menu Fan