Selecting System Mode; Pre-Set Energy-Saving Schedules - Honeywell RTH9580 User Manual

Setting system mode
SYSTEM
1 Touch
2 Touch desired option:
Heat: Thermostat controls only the heating
system.
Cool: Thermostat controls only the cooling
system.
Off: Heating/cooling systems are off.
Automatic: Thermostat selects heating or cooling as needed
depending on the indoor temperature.
Emergency Heat (heat pumps with aux. heat): Controls
auxiliary/emergency heat. Compressor is locked out.
Done
3 Touch to save and exit.
Note: The Automatic and Emergency Heat system settings may not
appear, depending on how your thermostat was installed.

Pre-set energy-saving schedules

This thermostat uses default Energy Saver settings that can reduce your heating/
cooling expenses. To customise settings, see next page.
Period Start time
Wake
6:00 am
Leave
8:00 am
Return 6:00 pm
Sleep
10:00 pm
Period
Occupied 1
Unoccupied 1
Occupied 2*
Unoccupied 2*
* Period 2 is cancelled by default. If you activate it, the values shown above are
default settings.
69-2715EF—07
to display system settings.
Heat
(Mon-Fri)
70°F (21°C) 78°F (25.5°C) 70°F (21°C) 78°F (25.5°C)
62°F (16.5°C) 85°F (29.5°C) 62°F (16.5°C) 85°F (29.5°C)
70°F (21°C) 78°F (25.5°C) 70°F (21°C) 78°F (25.5°C)
62°F (16.5°C)
Start time
8:00 am
10:00 pm
12:00 am
12:00 am
Done
Cool
(Mon-Fri) (Sat-Sun)
82°F (28°C) 62°F (16.5°C)
Heat
70°F (21°C) 75°F (24°C)
55°F (13°C) 85°F (29.5°C)
70°F (21°C) 75°F (24°C)
55°F (13°C) 85°F (29.5°C)
16
SYSTEM
Heat Cool
(Sat-Sun)
82°F (28°C)
Cool Fan
On
Auto
On
Auto