Mitsubishi FR-E500 Series Instruction Manual page 191

8. Class 0x66 - E500 Extended Object 1
(1) Class 0x66 Attributes - Instance 0
Note: Not applicable to the FR-E500KND.
(2) Class 0x66 Services
Note: Not applicable to the FR-E500KND.
(3) Class 0x66 Instance Attributes Instance 1
No. Access
10 Get/Set Pr. 0
11 Get/Set Pr. 1
12 Get/Set Pr. 2
13 Get/Set Pr. 3
14 Get/Set Pr. 4
15 Get/Set Pr. 5
16 Get/Set Pr. 6
17 Get/Set Pr. 7
18 Get/Set Pr. 8
19 Get/Set Pr. 9
20 Get/Set Pr. 10 DC Injection Brake Operation Frequency
21 Get/Set Pr. 11 DC Injection Brake Operation Time
22 Get/Set Pr. 12 DC Injection Brake Voltage
23 Get/Set Pr. 13 Starting Frequency
24 Get/Set Pr. 14 Applied Load Selection
28 Get/Set Pr. 18 High Speed Maximum Frequency Limit
29 Get/Set Pr. 19 Base Frequency Voltage
30 Get/Set Pr. 20 Acceleration/Deceleration Reference Frequency
31 Get/Set Pr. 21 Acceleration/Deceleration Time Increments (Note 4) 0
32 Get/Set Pr. 22 Stall Prevention Operation Level
Pr. 23 Stall Prevention Operation Level at Double
33 Get/Set
34 Get/Set Pr. 24 Multi-Speed Setting (Speed 4)
35 Get/Set Pr. 25 Multi-Speed Setting (Speed 5)
36 Get/Set Pr. 26 Multi-Speed Setting (Speed 6)
37 Get/Set Pr. 27 Multi-Speed Setting (Speed 7)
Parameters (Pr. 0 = No.10)
Attribute
Torque Boost
Maximum Frequency
Minimum Frequency
Base Frequency
Multi Speed (high speed)
Multi Speed (middle speed)
Multi Speed (low speed)
Acceleration Time
Deceleration Time
Electronic Thermal O/L Relay
Speed
173
Get other manuals https://www.bkmanuals.com
Default Setting
(Note 2)
(Note 2)
0.00Hz
60.00Hz
60.00Hz
30.00Hz
10.00Hz
(Note 2)
(Note 2)
(Note 2)
3.00Hz
0.5s
6.0% (Note 2)
0.50Hz
0
(Note 2)
(Note 3)
60.00Hz
150.0%
(Note 3)
(Note 3)
(Note 3)
(Note 3)
(Note 3)