Structure; Appearance And Structure; Functions - Mitsubishi FR-E500 Series Instruction Manual

1.3 Structure

1.3 Structure

1.3.1 Appearance and structure

(1) Front view
(2) Without accessory cover and front cover
* Use the PU connector for the FR-PU04 (option) and RS-485 communication.

1.3.2 Functions

Name
Node address setting
switches
POWER lamp (yellow) Lit to indicate that power is input (present).
ALARM lamp (red)
Operating status
indicator LED
PU connector*
POWER lamp (yellow)
ALARM lamp (red)
Control circuit terminal block
Operating status indicator LEDs
Node address setting switches
Control logic changing connector
DeviceNet
Main circuit terminal block
Wiring cover
0 0
SW1(×10)
SW2(×1)
Lit to indicate that a protective function is activated.
The operating status indicator LED is a 2 color (Red and Green) LED.
For details on the operating status please refer to page 25 which
details the system state and corresponding LED status.
Get other manuals https://www.bkmanuals.com
POWER lamp
(yellow)
Accessory cover
ALARM lamp (red)
Operating status
indicator LEDs
Rating plate
Front cover
Capacity plate
Wiring cover
terminal block
TM
Function
Used to set the inverter node address between
0 and 63.
For details, refer to page 47, 51.
4
OUTLINE
1