Changing A Parental Passcode On A Siriusxm Radio; Setting The Device Name; Updating The Media Player Software; Audio Return Channel - Garmin GPSMAP 9000 Series Owner's Manual

Changing a Parental Passcode on a SiriusXM Radio

Before you can change the passcode, the parental controls must be unlocked.
1 From the media screen, select Browse > Parental > Change PIN.
2 Enter your passcode and select Done.
3 Enter a new passcode.
4 Confirm the new passcode.

Setting the Device Name

1 From the media screen, select Options > Installation > Set Device Name.
2 Enter a device name.
3 Select Select or Done.

Updating the Media Player Software

You can update the software on compatible connected stereos and accessories.
See the stereo Owner's Manual at

Audio Return Channel

The HDMI Audio Return Channel (ARC) enables you to play the audio from the chartplotter over the stereo
system speakers and play HDMI audio on the chartplotter using only one HDMI cable.
ARC eliminates the need to connect a separate audio cable from the chartplotter to the stereo. Typically, in
systems without ARC, to play the audio from the chartplotter over the stereo system speakers, you would need a
separate cable.
The HDMI version 1.4 cables support ARC. When planning your stereo installation, you should check whether
your devices support ARC. Most devices that support ARC have an ARC label on the HDMI connector that
supports ARC.
NOTE: The Fusion MS-AV750 stereo supports ARC. You should update the stereo to use ARC with the
chartplotter.

Configuring a Stereo from the Chartplotter

You can configure various features of a compatible connected stereo using the chartplotter.
1 From the Media screen, select Options > Installation.
2 Select the name of the stereo.
3 Select a setting to configure.
NOTE: See the latest Owner's Manual for the stereo for more information about the settings you can
configure.
Configuring a Stereo from the Chartplotter
support.garmin.com for instructions on updating the software.
157