System Requirements - MICRO-EPSILON scanCONTROL 3000 Assembly Instructions Manual

6.

System Requirements

scanCONTROL Configuration Tools
The following minimum system requirements are necessary:
- Windows 7, Windows 8 or 8.1, Windows 10 (each 32 bit and 64 bit)
- 1-GHz or faster (32 bit and 64 bit) processor / 1 GB RAM
- Screen resolution: 1024 x 768
scanCONTROL 3D-View
The following minimum system requirements are necessary:
- Windows 8 or 8.1, Windows 10 (each 64 bit)
- 1-GHz or faster (64 bit) processor
- 1 GB RAM
- Screen resolution: 1024 x 768
- Graphics card / GPU with OpenGL 3.1 or higher
7. Quick Start, Initial Operation, Software
Mount the sensor according to the installation instructions.
Install the software.
Connect the sensor to the PC using the optionally available SCR3000A-x Ethernet
cable.
Connect the shield of the power supply cable to the PE grounding conductor of
the main power supply. Close unused connection plugs with the included
protective caps. Turn on the power supply (24 VDC).
Please wait until the scanCONTROL measuring system is recognized by the PC.
This may take a few seconds.
Now you can operate the scanCONTROL measuring system with the
scanCONTROL software packages.
i
Operating a scanCONTROL sensor via Ethernet may require the IP settings of the
PC/sensor or the firewall settings to be adjusted, see Chap. 5.2.5 of the operating
instructions.
scanCONTROL 3000 / 3050
You will find the software online on the product
website of the sensor or in the download area:
https://www.micro-epsilon.
com/2D_3D/laser-scanner/Soft-
ware/downloads/.
Follow the dialog through the installation
process:
A. Reading the installation help
B. Installing the software
C. Additional information in the online
documentation
Page 6