Finish Removal (On Select Orbital Models) - Kärcher Windsor Chariot 2 iScrub 20 Operating Instructions Manual

Operations

Finish Removal (on select orbital models)

It may be desirable to remove layers of floor finish from
a floor. Use the chemical free floor finish removal mode
for best results.
1. Install the proper pads.
2. Rotate the function mode switch to the finish
removal position.
3. Position the solution shut-off valve at two o' clock.
NOTE: The valve position can be varied slightly to
produce desired results on different floor types.
Return the valve to the vertical position for other
cleaning modes.
Shut-off valve at two o'clock position
26 86398220 Operators Manual - Chariot-2 iScrub 20