Delta Q Ic650 Charger Maintenance Instructions - Kärcher Windsor Chariot 2 iScrub 20 Operating Instructions Manual

Delta Q IC650 Charger Maintenance
Instructions
1. Do not expose charger to oil, dirt, mud or direct
heavy water spray when cleaning the vehicle or
machine.
2. The enclosure of the charger meets IP66, making it
dust-tight and protected against powerful water
jets. The AC inlet connection itself, when mated, is
rated to IP20, which is not protected against water.
Protect the AC connection if used in wet or dusty
environments.
3. If the detachable input power supply cord set is
damaged, replace with a cord that is appropriate
for your region:
- North America: UL or CSA listed / approved
detachable cord at least 1.8m in length (≥ 6 feet), 3
conductor, 16AWG minimum and rated SJT; termi-
nated in a grounding type IEC 60320 C14 plug
rated 250V, 13A minimum.
- All other regions: Safety approved detachable
cord, 3 conductor, 1.5mm² minimum, rated appro-
priately for industrial use. The cord set must be
terminated on one end with a grounding type input
connector appropriate for use in the country of
destination and, on the other end, an output
grounding type IEC 60320 C14 plug.
86398220 Operators Manual - Chariot-2 iScrub 20
Maintenance
37