Storing The Equipment - ABB GridShield 3P Installation, Operation And Maintenance Manual

Table of Contents

Advertisement

R E C E I V I N G , H A N D L I N G A N D S TO R A G E

3.3 Storing the equipment

For long-term storage, it is recommended to store
the cabinets indoors. If either cabinet needs to be
stored outdoors, make sure to activate the anti-
condensation heaters inside the low voltage
control cabinet. It is also recommended to use
a heater in the recloser head, if available.
The GridShield
recloser and the control
®
cabinet must be stored in an upright position
to avoid moisture buildup.
The low voltage control cabinet includes
rechargeable batteries. These batteries need
to be supplied with power of the correct voltage
and frequency through the charger assembly. It is
advisable to periodically check the battery voltage.
Battery is disconnected for transportation.
Reconnect the batteries prior to use.
If the recloser will not be put into immediate use,
it is crucial to handle and store it properly to help
ensure good operating condition in the future. The
accessories and cables can be stored separately
in a box. For long-term storage, these boxes should
be placed indoors to prevent water accumulation
and rust on the equipment.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gridshield 3sp

Table of Contents