Aastra 6700i Installation Instructions Manual page 39

11.13.2
26/1531-ANF 901 14 Uen E10 2014-01-22
Expansion modules can be added to 6753i, 6735i/55i, 6737i/57i and
6739i.
When adding an expansion module to the telephone, the keys for MNS,
TNS (defined in the PBX), MCT and PEN are moved from the telephone
to the expansion module.
Default key layout
This chapter shows the default key layout per model. The following
system keys can be changed or removed via Manager TS or via editing
the model specific configuration files.
• Services
• Local Directory
• Callers List
• Message Waiting
• Corporate Directory
If one of these functions is removed, it can be replaced by a key with
another function that shall be generic for all phones of a certain model.
The following options are possible to set:
• speeddial
• xml
• speeddialxfer (the softkey is configured to transfer calls and
configured for speed dialing to a specific number.)
• speeddialconf (the softkey is configured as a speed dial key and
as a conference key.)
• phone lock (the key is used to lock / unlock the phone).
• none (the softkey is not used)
• empty (the softkey is configured to force a blank entry on the phone
display
The following keys that are pushed out from MX-ONE Telephony Server
and can not be changed via Manager TS, they need to be edited manu-
ally in config file /etc/opt/eri_sn/ip_telephony.conf.. (If the key values
are set to "", they are not pushed to the phone). This file must be
changed in all servers in the system. At upgrading of the MX-ONE soft-
ware this file have to be edited again. 'restart -u SIPLP' is required after
the file is edited to activate changes.
• Logon/Logoff
• Diversion
C P
ONFIGURING THE HONE
39