Aastra 6700i Installation Instructions Manual page 31

Sip terminals for mx-one

Hide thumbs Also See for 6700i:

Table of Contents

11.3

26/1531-ANF 901 14 Uen E10 2014-01-22

! directed call pickup prefix: Pickup

! collapsed context user softkey screen:1

softkey selection list: "none,speeddial,line,xml,speeddialxfer,speeddialconf,phone-

" *)

lock,empty

*) the options for the softkeys that are working with MX-ONE and is

presented in the web UI.

Automatic LAN Access Control, IEEE802.1x

The IEEE802.1x standard is used for port access control

authentication. The LAN switch must support IEEE802.1x signalling

and there must be a RADIUS server handling the authentication. This

feature supports both EAP-MD5 and EAP-TLS protocols.

Figure 3: Components in LAN access control

Below is an example of the settings in the phone configuration file

(aastra.cfg) when EAP-TLS shall be used:

eap type: 2

identity: Phone_Floor1

802.1x root and intermediate certificates:aastra67xxi/Aastra_Client_ca.pem

802.1x local certificate:aastra67xxi/Aastra_Client_cert.pem

802.1x private key: aastra67xxi/Aastra_Client_key.pem

802.1x trusted certificates: aastra67xxi/Aastra_Client_ca.pem

The certificate shall be available on the software server. In the example

above they are stored under the folder aastra67xxi. The certificate files

must be loaded into the phones before IEEE802.1x is activated.

Below is another example showing how to set the parameters in

aastra.cfg when MD5 shall be used:

ONFIGURING THE

HONE

Table of Contents