Aastra 6700i Installation Instructions Manual page 18

A 6700 SIP T MX-ONE
ASTRA I ERMINALS FOR
7 How to Start a New Phone
The phone is delivered with default settings for an IP network. These
settings must be adapted to the local network using phone configuration
files.
If Manager Telephony Server (MTS) is used and chapter 5.1 Install IP
Phone SW Server on page 9 has been followed, the phone configuration
files are generated and stored on the Software Web Server.
If MTS is not used, a software server must be set up supporting any of
the protocols HTTP or HTTPS to host the phone firmware, language files
and configuration files. The firmware files can be downloaded from
Service Support Plaza. There are phone configuration template files
adapted for MX-ONE stored under: etc/opt/eri_sn/aastraSIPPhone.
All firmware files are described in section 8.1 Phone software and config-
uration files on the software server on page 24.
When the phone is powered up, it will look for software (firmware) and
configuration files on the software server according to its configuration
server settings, see section11.8 Setting the IP Address and Download
Protocol of the Software Server on page 34.
18 26/1531-ANF 901 14 Uen E10 2014-01-22