Aastra 6700i Installation Instructions Manual page 24

A 6700 SIP T
ASTRA I ERMINALS FOR
8
8.1
24
MX-ONE
Managing IP Phone SW
Phone software and configuration files on
the software server
If any configuration file or firmware is changed on the software server,
the phones are updated when restarted. The following files need to be
stored on the software server:
<phone model>.st
The application firmware (software) for the phones. The names of
the application files are:
• 6730i.st, 6731i.st, 6735i.st 6737i.st and 6739i.st
• 53i.st, 55i.st and 57i.st (for 6753i, 6755i and 6757i)
aastra.cfg
This file contains the configuration parameters for all 6700 phones
in the system. The configuration file has to be adapted for each
installation.
This file is created in IP Phone Configuration File task in Manager
Telephone Server (MTS). If it is not possible to use MTS, the
aastra.cfg template must be used which is stored in MX-ONE
under /etc/opt/eri_sn/aastraSIPphones/.
aastra.tuz
This is the encrypted aastra.cfg file. The phone uses http protocol
to fetch this file. The configuration file has to be adapted for each
installation and then it has to be encrypted, see section 19.1
Encrypted Configuration Files on page 77.
<phone model>.cfg
This file contains configuration parameters for the key layout for
each phone model. The names of the configuration files are:
• 6730i.cfg, 6731i.cfg, 6735i.cfg, 6737i.cfg, 6739i.cfg,
6753i.cfg, 6755i.cfg, 6757i.cfg
The settings in <phone model>.cfg will override the settings in
aastra.cfg.
This file is created in IP Phone Configuration File task in Manager
Telephone Server (MTS). If it is not possible to use MTS, the
<phone model>.cfg template must be used which is stored in
MX-ONE under /etc/opt/eri_sn/aastraSIPphones/.
26/1531-ANF 901 14 Uen E10 2014-01-22