Aastra 6700i Installation Instructions Manual page 27

9
9.1
9.2
26/1531-ANF 901 14 Uen E10 2014-01-22
Restart / Restore
There are three options:
• Restart the phone. Can be used when settings shall be applied.
• Remove local configuration settings. The settings that are done
from the phone UI and web UI are lost.
• Restore to factory default. The phone gets the same data as when
leaving the factory and removes any saved directory files.
Restart
Phone UI
• Press the Options key
• Scroll down and select Restart Phone
Web UI
• Log in to the web interface. Operation > Reset > Restart Phone
Remove local configuration settings
All configuration made on the phone, via Web UI or configured by
MX-ONE at logon is stored as local configuration in the phone. By
removing the local configuration the administrator can ensure that phone
is configured according to configuration files only.
Phone UI
• Press the Options > Administrators Menu > Erase Local Config
Restart the phone.
6739i; Press Options > Advanced (log in as administrator) >
Reset > Erase Local Config.
Web UI
• Log in to the web interface. Click on Operation > Reset > Remove
Local Configuration Settings.
Restart the phone.
It is also possible to remove the local configuration settings registered
terminals, by entering the following command from MX-ONE:
R / R
ESTART ESTORE
27