Fault Logger Mode; Time And Date Mode - ABB BALDOR ACB530 User Manual

6.2.9 Fault Logger Mode

In the Fault logger mode, you can:
• view the drive fault history of maximum ten faults (after a power off, only the three latest faults are kept in the memory)
• see the details of the three latest faults (after a power off, the details of only the most recent fault is kept in the memory)
• read the help text for the fault
• start, stop, change the direction and switch between local and remote control.
6.2.9.1 How to View Faults
Step
1
Go to the Main menu by pressing
pressing
2 Go to the Fault logger mode by selecting FAULT LOGGER on the menu with keys
and
latest fault.
The number on the row is the fault code according to which the causes and
corrective actions are listed in chapter Fault tracing.
3
To see the details of a fault, select it with keys
4
To show the help text, press
After reading the help, press

6.2.10 Time and Date Mode

In the Time and date mode, you can:
• show or hide the clock
• change date and time display formats
• set the date and time
• enable or disable automatic clock transitions according to the daylight saving changes
• start, stop, change the direction and switch between local and remote control.
The assistant keypad contains a battery to ensure the function of the clock when the panel is not powered by the drive.
6-12 Using the Keypad
Action
if you are in the Output mode, otherwise by
repeatedly until you get to the Main menu.
, and pressing . The display shows the fault log starting with the
. Scroll the help text with keys
to return to the previous display.
and , and press .
and
Display
LOC MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT 00:00
LOC FAULT LOGGER
10: PANEL LOSS
19.03.05 13:04:57
6: DC UNDERVOLT
6: AI1 LOSS
EXIT DETAIL
00:00
LOC PANEL LOSS
FAULT
10
FAULT TIME 1
13:04:57
FAULT TIME 2
EXIT 00:00
LOC DIAGNOSTICS
.
Check: Comm lines
and connections,
parameter 3002,
parameters in groups
10 and 11.
EXIT 00:00
MN796 - ACB530
1
ENTER
DIAG
OK