Remote Controller Introduction - Gree GVC36ALXH-K3NTC7A Service Manual

Service Manual

6.2 Remote Controller Introduction

Buttons on remote controller
Introduction for icons on display screen
Introduction for buttons on remote controller
NOTE:
● This is a general use remote controller, it could be used for
the air conditioners with multifunction; For some function, which
the model doesn't have, if press the corresponding button on
the remote controller that the unit will keep the original running
status.
● After putting through the power, the air conditioner will give
out a sound. Operation indicator "
operate the air conditioner by using remote controller.
Technical Information
1
2
4
6
9
13
14
15
Operation mode
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Set time
TIMER ON/TIMER OFF
Turbo fan speed
Quiet mode
X-FAN function
" is ON . After that, you can
1 ON/OFF button
2 MODE button
3 FAN button
4 SAVE button
5
6
COOL button
7 HEAT button
8
button
9
button
3
SLEEP button
10
5
11 WiFi button
12 X-FAN button
7
button
13
8
P
10 14
LIGHT button
11
15
TIMER button
12
Set fan speed
{
(No ,
only after turning it on.)
Send signal
battery power
{
This is a general remote controller.Some
WiFi
models have this function while some
do not. Please refer to the actual models.
Child lock
Switch temperature displaying type on
the unit's display
P
Left & right swing
Up & down swing
Sleep mode
● Under on status, pressing the button on the remote controller,
the signal icon " " on the display of remote controller will blink
once and the air conditioner will give out a "di" sound, which
means the signal has been sent to the air conditioner.
1. ON/OFF button
Press this button can turn on or turn off the air conditioner. After
turning on the air conditioner, indoor unit will give out a sound.
2. MODE button
Press this button to select your required operation mode.
fan speed. It's displayed
function
23