Gree GVC36ALXH-K3NTC7A Service Manual page 82

Service Manual
Step
7. Remove the left side plate
Remove the screws connecting the left
side plate and the chassis. Remove the
left side plate.
8. Remove axial flow blade
Remove the nut on the axial flow blade.
Remove the blade.
9. Remove the motor support and motor
Remove the tapping screws fixing the
motor support. Raise the motor support
to remove it.
Remove the tapping screws fixing the
motor. Disconnect the leading wire
insert of the motor. Remove the motor.
Installation and Maintenance
Procedure
left side plate
axial flow blade
nut
motor support
motor
79