Table of Contents
Advertisement
Button
Function
Select the favourites operating mode
directly.
→ "Favourites", Page 23
Go back one setting.
Start or pause operation.
→ "Basic operation", Page 13
Select the timer.
→ "Setting the timer", Page 16
Press and hold for approx. 4 seconds
to activate the childproof lock.
→ "Childproof lock", Page 24
4.3 Display
The display is divided into different areas.
Digital setting ring
You can use the digital setting ring on the display to
change the setting values.
When you reach the minimum or maximum value avail-
able, this value remains on the display. If required, use
the setting ring to turn the value back again.
Finely tuned setting values
To fine-tune the setting values, e.g. to set a time to the
precise minute, press and hold the corresponding area
in the setting ring for around 1 - 2 seconds. The finely
tined setting values are shown in dots.
Status indicator
Status information is shown at the top of the display.
Symbol
Meaning
Timer is activated.
→ "Setting the timer", Page 16
Childproof lock is activated.
→ "Childproof lock", Page 24
The appliance door is locked due to the
cleaning function or childproof lock.
→ "Pyrolytic activeClean cleaning func-
tion", Page 29
→ "Basic settings", Page 24
WiFi signal strength for Home Connect.
The more lines of the symbol are filled,
the better the signal.
If the symbol is struck through
is no WiFi signal.
If there is an "x" at the symbol
is no connection to the Home Connect
server.
→ "Home Connect ", Page 25
Remote start with Home Connect is ac-
tivated.
→ "Home Connect ", Page 25
Remote diagnostics with Home Con-
nect for maintenance is activated.
→ "Home Connect ", Page 25
Settings area
The settings area is in the centre of the display.
You can see current options and settings that have
already been made in the settings area.
The menu and other setting options are arranged hori-
zontally. Selection lists for functions are vertically ar-
ranged. Swipe over the display to scroll in the settings
area. To select a function, press the function on the dis-
play.
→ "Setting the operating mode", Page 14
Possible symbols in the settings area
Symbol
Note: A blue marking "new" or a blue dot on a function
indicates that a new function, a new favourite or an up-
date was downloaded to your appliance using the
Home Connect app.
4.4 Cooking compartment
Various functions in the cooking compartment provide
support when operating your appliance.
Shelf supports
The shelf supports in the cooking compartment enable
you to place accessories at different heights.
→ "Accessories", Page 12
Your appliance has 5 shelf positions. The shelf posi-
tions are numbered from bottom to top.
The shelf supports are equipped with pull-out rails on
one or more levels, depending on the appliance type.
You can remove the shelf supports, e.g. for cleaning.
→ "Rails", Page 33
, there
Lighting
, there
One or more oven lights illuminate the cooking com-
partment.
When you open the appliance door, the light in the
cooking compartment switches on. If the appliance
door remains open for longer than around 18 minutes,
the light switches off again.
For most operating modes, the lighting is switched on
during operation. The lighting switches off again when
the operation ends.
Cooling fan
The cooling fan switches on and off depending on the
appliance's temperature. The hot air escapes above
the door.
Familiarising yourself with your appliance en
Meaning
Confirm the setting value.
Reset the setting value.
Change the setting value while the ap-
pliance is in operation.
9
Advertisement
Table of Contents
