Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Subscribe to Our Youtube Channel
Related Manuals for Draper 28357
Summary of Contents for Draper 28357
- Page 1 Original Instructions Version 1 5 PIECE AIR TOOL KIT 28357...
-
Page 2: Preface
All photographs and drawings within this manual are document is part of the product; retain it for the life supplied by Draper Tools to help illustrate correct of the product, passing it on to subsequent holders. operation of the product. -
Page 3: Table Of Contents
2. Contents 1. Preface After Use Product Reference 10. Operating Instructions: Air Gun and Tyre Inflator Revisions Understanding the Safety Content 10.1 Air Gun Copyright © Notice 10.2 Tyre Inflator 2. Contents 11. Maintenance and Troubleshooting 3. Warranty 11.1 General Maintenance 4. -
Page 4: Warranty
This warranty period covers parts and labour for six months from the date of purchase. Your Draper Tools guarantee is not effective until you can Where tools have been hired out, the warranty period produce, upon request, a dated receipt or invoice to covers 90 days from the date of purchase. -
Page 5: Product Introduction
The air gun is intended for cleaning with compressed air Read this manual in full before attempting to assemble, and clearing blockages from small spaces. operate or maintain the product, and retain it for later use. 4.2 Specification Stock No. 28357 Part No. DAT-ATK5 Paint spray gun: Tyre inflator: Nozzle 1.5mm... -
Page 6: Health And Safety Information
Important: DO NOT use this product if it is damaged − The pressure of the connected air supply MUST in any way. Contact Draper Tools to discuss repair and NOT exceed more than 10% of the rated pressure replacement options. - Page 7 5. Health and Safety Information • NEVER spray solvents, solvent-based liquids, acetone or undiluted acids using the cleaning gun. − Spray mist from these substances is very dangerous and may be explosive. • ONLY use biodegradable sprays with the cleaning gun and clean the tool immediately after use.
-
Page 8: Identification And Unpacking
6. Identification and Unpacking 6.1 Product Overview Paint spray gun Air cap Air cap locking ring Fluid control dial Fluid needle Hanging loop Nozzle (10) Spray control dial Spray direction control Spray gun air line inlet (10) Spray gun paint cup (11) Spray gun trigger (11) Air gun... - Page 9 6. Identification and Unpacking (16) (15) (17) (12) (13) (14) Cleaning gun (15) Hanging loop (12) Cleaning gun air line inlet (16) Nozzle (13) Cleaning gun suction cup (17) Nozzle locking nut (14) Cleaning gun trigger (25) (21) (23) (24) (27) (26) (22)
-
Page 10: What's In The Box
If any part is occurred during shipment. damaged or missing, do not attempt to use the product. Please contact the Draper Helpline; contact details can be found at the back of this manual. 1 x Paint spray gun... -
Page 11: Preparation Instructions
7. Preparation Instructions Important: Before using this product, read and Important: Always check the machine operating understand all the safety instructions listed in this pressure before use. manual. Water in the compressor tank may cause considerable corrosion to air tools; the compressor should be drained 7.1 Preparing the Air Supply for Use with daily to avoid excessive water in the air supply. -
Page 12: Cleaning The Paint Spray Gun Before First Use
7. Preparation Instructions 7.2 Cleaning the Paint Spray Gun Before 7.4 Assembly, Filling and Connection to First Use the Air Supply Important: It is recommended to use a 1/4" BSP thread Before first use, the paint spray gun must be cleaned thoroughly to remove any oil, grease and the protective whip hose (Stock No. - Page 13 7. Preparation Instructions Fig. 3 Fig. 5 2. If assembling the paint spray gun, rotate the fluid 4. Screw the 1/4" air line coupler (I) onto the spray gun control dial (3) clockwise as far as possible to close air inlet (Fig. 5). the fluid valve (Fig.
-
Page 14: Operating Instructions: Paint Spray Gun
8. Operating Instructions: Paint Spray Gun 8.2 The Spray Control Dial Important: Before using this product, read and understand all the safety instructions listed in this manual. DO NOT make any adjustments to the paint spray gun while the trigger is depressed. 8.1 The Fluid Control Dial Fig. -
Page 15: The Trigger
• Slightly overlap the movements of the spray gun to 3. Important: Draper Tools recommends that you test ensure an even distribution at the edges of each the spray output on an area of scrap material before stroke. -
Page 16: Operating Instructions: Cleaning Gun
9. Operating Instructions: Cleaning Gun 9.2 The Trigger Important: Before using this product, read and understand all the safety instructions listed in this manual. DO NOT make any adjustments to the cleaning gun while the trigger is depressed. 9.1 The Nozzle (16) (14) Fig. -
Page 17: Operating Instructions: Air Gun And Tyre Inflator
10. Operating Instructions: Air Gun and Tyre Inflator 10.1 Air Gun 10.2 Tyre Inflator Important: Before using this product, read and Important: Before using this product, read and understand all the safety instructions listed in this understand all the safety instructions listed in this manual. - Page 18 10. Operating Instructions: Air Gun and Tyre Inflator (21) (25) Fig. 16 Fig. 17 4. Observe the value indicated on the appropriate scale 6. To reduce the pressure in the tyre, press the exhaust of the pressure gauge (25) (Fig. 16). button (21) (Fig.
-
Page 19: Maintenance And Troubleshooting
11. Maintenance and Troubleshooting Important: Read all the Health and Safety information in 3. Clean the air cap and nozzle head: this manual before attempting to maintain this product. All maintenance should be carried out ONLY by authorised and suitably qualified personnel. WARNING! ALWAYS ensure that the tools are disconnected from the air supply and that the air supply is switched off before attempting to... -
Page 20: Cleaning The Cleaning Gun
11. Maintenance and Troubleshooting 11.3 Cleaning the Cleaning Gun 4. Clean the fluid needle and chamber: 1. Flush and fill the cleaning gun suction cup (13) with a mild cleaning agent. (32) 2. Attach the suction cup to the cleaning gun body. 3. -
Page 21: Troubleshooting
The air valve seal or spring is Replace the parts as necessary. broken. Contact Draper Tools for repair and replacement options. Air is leaking from the air cap or The air valve is sticking or bent. - Page 22 Clean the air cap (see 11.2) or The openings in the air cap are clogged or damaged. replace the part if necessary. Contact Draper Tools for repair and replacement options. The tool does not spray the fluid. The air pressure at the tool is too Check and regulate the air pressure low.
- Page 23 11. Maintenance and Troubleshooting Problem Possible Cause Remedy Tyre Inflator The pressure gauge does not work The valve coupling is not correctly Ensure that the valve coupling is correctly. attached to the tyre valve. inserted up to the valve stop. The seal between the gauge and the Check and tighten the gauge tool is not airtight.
-
Page 24: Returns And Disposal
Store these materials in suitable containers and dispose of them in accordance with local regulations. Draper Tools and its agents cannot be responsible for the disposal of these substances. At the end of its working life, dispose of the product responsibly and in line with local regulations. -
Page 25: Explanation Of Symbols
13. Explanation of Symbols Read the instruction manual Operating pressure range (psi) (example) Warning! Operating pressure range (bar) (example) Do not incinerate or throw onto fire Max. operating air pressure psi (example) Max. operating air pressure bar Do not abandon in the environment (example) 1/4"... - Page 26 Notes – 26 –...
- Page 27 Notes – 27 –...
- Page 28 Telephone Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 General Fax: +44 (0) 23 8026 0784 Please contact the Draper Tools Product Helpline for repair and servicing enquiries. © Published by Draper Tools Limited...
Need help?
Do you have a question about the 28357 and is the answer not in the manual?
Questions and answers