Philips AquaTrio 9000 Series Instructions Manual page 42

English
42
Problem
It is not possible, to connect
the 2-in-1 Handheld to the
dust bucket.
The appliance stopped
working.
The sound of the appliance
changed while cleaning.
The appliance has a lower
suction power than usual.
Dust escapes from the
appliance.
Dust escapes when opening
the dust bucket.
Possible cause
The filter case is assembled
upside down.
The filter case is not closed
properly.
You accidentally touched the
on/off button with your
hand.
The appliance is clogged.
Obstacles are blocking the
cyclone.
The filter and/or the cyclone
are dirty.
Something is blocking the
cyclone.
You have not attached the
filter case properly to the dust
bucket or you have not
attached the dust bucket
properly to the appliance. In
both cases, there will be a loss
of suction power.
The foam filter is not present in
the filter case, or the top cover
is missing.
This is normal behavior due to
underpressure.
Solution
the appliance. This might already solve the
problem.
Invert the filter case. The round opening
should be visible.
Make sure you hear a click when closing
the filter case. If it is difficult to close, the
foam filter is probably placed upside down.
Switch on the appliance by pushing the
on/off button.
Switch the appliance off and remove the
battery or powerhouse. Then locate and
remove the cause for the blockage. After
that, restart the appliance. If you cannot
identify the cause of the blockage, restart
the appliance. This might already solve the
problem.
Check the cyclone for obstacles and remove
them.
Empty the dust bucket. Clean the filter and
the cyclone. Make sure that you remove
any hair and dirt that is stuck in the cyclone.
You can remove the cyclone for easy
maintenance. Make sure that you wash the
filter at least once a month if you use the
appliance regularly.
Check the cyclone for objects stuck in it and
remove any object that is blocking the
cyclone. Make sure that you remove any
hair and dirt that is stuck in the cyclone.
Make sure that you attach the filter case to
the dust bucket and the dust bucket to the
appliance properly.
Make sure that the filter is in the appliance
and assembled correctly.
If possible, open the appliance outside.