Philips AquaTrio 9000 Series Instructions Manual page 18

English
18
Cleaning the Vacuum & Mop set-up
AUTOCLEAN after every use
To prevent odors and scale deposits, use the AUTOCLEAN function after every
use. The AUTOCLEAN mode helps you to clean your full appliance in
approximately 4 minutes.
1 Place the Vacuum & Mop set-up in the After-Clean & Storage station.
Note: If the dirty water level is below the AUTOCLEAN level, it is not
necessary to empty the tank before starting the AUTOCLEAN program. You
can skip the following steps and move forward to step 6.
2 Push the button to unlock the dirty water tank and remove it.
3 Remove the wet filter from the dirty water tank.