Philips AquaTrio 9000 Series Instructions Manual page 13

Using the protective cap
Active protection system
9 To switch on the appliance, press the on/off
appliance is ready for use.
10 Use the cleaning mode button to choose between three different settings:
-
Water absorption mode
-
Normal wet mode
-
Intense wet mode
By selecting the normal wet mode
cleaning. The intense wet mode
If there are wet spots on the floor after cleaning, you can select water absorption
mode to clean them up. We also recommend using it when lifting the
appliance over a threshold, carpet or stairs.
If you select water absorption mode
and increase suction power for 45 seconds to absorb any water on the floor.
Note: older models feature normal wet mode
but not water absorption mode
Tip: If you store the Vacuum & Mop set-up on the after-clean and storage
station without the handheld attached, you can put the protective cap on the
wet module as extra protection for the appliance.
-
This appliance is equipped with an active protection system. This active
protection system has been designed to recognize when a foreign object
other than dirt or liquid is picked up from the floor.
button and wait until the
, you can use the appliance for regular wet
is for cleaning extra stubborn stains.
, the appliance will stop supplying water
and intense wet mode
.
English
13
,