Attaching The Chute Deflector; Attaching The Chipper Chute - Craftsman 1450 Series Operator's Manual

ATTACHING
THE CHUTE DEFLECTOR
.
A. Removethe wingknobsfrom eachside of the lowerimpeller
housing.SeeFigure3.
B. Removethe hexlock nut, spacers,and hex boltfrom thetop of
the impellerhousing.
A. Align the chutedeflectorin positionon the dischargeopening
and insert hexbolt with spacerthroughhingeon chute
deflector(spacersfit insideof hinges). See Figure4.
B. Placesecondspaceroverhex boltinsideotherhinge and
securewith hex lock nut.
C. Securebothsides of chutedeflectorto impellerhousingusing
wing knobspreviouslyremoved.
ATTACHING THE CHIPPER CHUTE
A. Removethe threecuppedwashersand hex nutsfrom weld
studsaroundthe openingon the sideof the impellerhousing.
See Figure5.
B. Removethe hexbolts,flat washers,and lock nuts fromthe two
holeson the upperend of the supportbrace.
i
Figure3
Figure4
f
Figure5
9