Table of Contents
Advertisement
other wheelchair functionalities, such as seating positions, etc., then you
have to select Profiles/Modes.
R-net trip codes
TROUBLE:
When a fault is detected by the device, an R-net trip code will be
generated. The trip code will be shown on the joystick (if it is present
and equipped with a graphic display). The trip code will also be
logged in the R-net system and can be investigated using the R-net PC
Programmer.
If you want to learn more about trip codes, see the Curtiss-Wright
manual | SK77981-14 R-net Technical Manual.
Supported R-net parameters
The following R-net parameters of the wheelchair electronics may or may not
be supported by the mo-vis joysticks.
PARAMETER
Momentary screens
48
SUPPORTED
Global parameter
N
Multi Joystick Installation Manual
FIRMWARE
VERSION
Advertisement
Table of Contents
Need help?
Do you have a question about the Multi Joystick LiNX and is the answer not in the manual?