Table of Contents
Advertisement
Multi Joystick Installation
1
Define the position of the joystick.
When the jack connections are at the right hand side, a forward
movement of the joystick will result in an according forward movement
of the wheelchair. If needed, you can change this position in steps of 90°
with the Configurator Software.
2
Determine which of the three slots you will use to guide the cable.
3
Secure the mounting plate with the four screws to the base of the
joystick housing.
Multi Joystick Installation Manual
15
Advertisement
Table of Contents
Need help?
Do you have a question about the Multi Joystick LiNX and is the answer not in the manual?
Questions and answers