Test Drive - Mo-vis Multi Joystick LiNX Installation Manual

CAUTION:
1 Activate the wheelchair operating system.
2 Check for any error message.
TROUBLE:
Joystick Connection on page 44
on page 46
3 Move the joystick slowly forward until you hear the parking breaks
switch off.
4 Immediately release the joystick. You should hear the parking break
react within a few seconds.
5 Repeat 3 and 4 three times, while slowly moving the joystick towards
you, to the left and to the right.
6 Check whether the power on/off (pwr) and mode (in) switch function
properly.

Test drive

Do a test drive with the wheelchair.
1 Check whether the wheelchair and all its functionalities function
correctly in all positions the user may use the joystick and switches.
2 Check whether cables or parts may not get damaged or hindered in any
possible position of the wheelchair.
Multi Joystick Installation Manual
The wheelchair may start to move during the test.
for more information on the error messages, see
and R-net Joystick Connection
Omni
35