Nilfisk-Advance Advance SC4000 Instructions For Use Manual page 14

A - ENGLISH
INFORMATION MENU DISPLAY - CONTINUED
Options Menu visible only with yellow (Supervisor) SmartKey.
System Menu visible with either blue (User) or yellow (Supervisor) SmartKey
1
Options
Solution
Solution In Rev
Lock Detergent
Beacon
Burst Of Power (s)
Lock Speed Limit
Inactivity Time (min)
Impact Detect
Impact Level
System
MMC Firmware
UI Firmware
CSP190-Comm F/W
CSP190-Motor F/W
MMC S/N
UI S/N
Impact Log
*Default setting
SERVICE NOTE:
for more details.
A - 14
INSTRUCTIONS FOR USE
Menu Level
2 3
Proportional*
UK
No*
Yes
No*
Yes
On*
Off
min = 60*
step = 60
min = 50
step = 10
No*
Yes
min = 1
step = 1
default = 15
Off*
Log
Lockout
High*
Low
Advance SC4000 - 56091272
Notes
User selectable options
conserve water.
Leave solution on in reverse?
Lockout detergent percentage adjustment for user?
Beacon light on/off
available speed
Lockout scrub speed limit for user?
Inactivity time before putting machine in sleep mode
(minutes)
Impact detection status
Log – Impact is recorded
Lockout – Impact is recorded and User is locked
out of scrub functions (Display shows (C26)) until
machine is reset with a Supervisor key.
Impact detection sensitivity level. If nuisance
adjust setting to low.
Main controller (mmc) pcb serial number
User interface panel (ui) pcb serial number
timestamp and user id (only if enabled)
9/2022