PRODIS C Series Technical Manual page 5

manufacturer shall be held harmless in case of damages arising due to the lack of the ground
installation. To see "Installation" chapter (7).
In order to assure the proper operation and efficiency of this equipment, it is extremely important to
follow the recommendations of the manufacturer, especially those related to cleaning and maintenance
operations, which should be performed by qualified personnel only.
CAUTION: The intervention of non-qualified personnel, besides of being dangerous, could result in
serious malfunctioning. In case of damages, contact your distributor. We recommend always using
original spare parts.
The company reserves the right to make changes in specifications and design without prior notice.
This signal indicates "Risk of fire / Flammable materials" because of the use of flammable refrigerant.
For compression-type appliances that use flammable refrigerants should additionally consider the
substance of the warnings listed below:
•
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of
obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than
those recommended by the manufacturer.
•
Do not damage the refrigerant circuit.
•
Do not use electrical appliances inside the food storage compartments of the appliance, unless
they are of the type recommended by the manufacturer.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this
appliance.
In case of a flammable refrigerant leakage:
•
Do not generate flames close to the appliance.
• Do not switch on/off or plug in/off the appliance.
• To ventilate immediately the area where appliance is located by opening doors and/or windows.
•
To call to an authorized technical service.
Disposal of the ice maker: The company encourages to follow the regulations of each country regarding
eco-friendly disposal of electric and electronic devices such this one. User who is wanting to dispose of
this equipment must contact the manufacturer and follow the method to appropriate differentiated
collection for the subsequent treatments.
5