Elem Garden Technic TCB20V-2XLI2AF Translation Of The Original Instruction page 72

Lawn mower + grass trimmer + blower
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 56
ASSEMBLY
WARNING: Deactivate and
remove the battery from the
cleaning or making any
Fitting the blower tube
To fit the long tube on the blower, insert it into the
outlet orifice of the blower until you hear a "click".
Removing the blower tube
Press and hold the blocking button, pull the blower
tube outwards and remove it.
OPERATION
On/off control button
The appliance continues to blow for a few seconds
after being deactivated. Wait for the turning of the
motor to stop before activating it again. The blower
should not be deactivated and reactivated rapidly.
▪ Connect the battery pack to the cordless blower,
ensuring it is securely in place.
▪ To activate the cordless blower, press on the lock
button and on the on/off trigger button.
▪ When you release the on/off trigger button, the
appliance deactivates.
WARNING: Before inserting the
battery pack into the appliance,
check that the on/off trigger
button reacts correctly and
returns to the "off" position
when released. This can cause
damage to the control.
Using an appliance with a
malfunctioning control can lead
to a loss of control and cause
serious personal injury.
appliance before
adjustments!
always
BLOWING
Firmly hold the blower in one hand and carry out
blowing work by moving the blower gently from left
to right.
When you use the blower in proximity to a building,
a large object or a vehicle, direct the nozzle in the
opposite direction.
When working in a corner, start in the corner and
work progressively outwards.
CLEANING AND MAINTENANCE
Cleaning
Keep the ventilation slots clean in order to avoid
overheating of the motor.
Regularly clean the appliance casing with a soft
cloth, preferably after each use.
Keep the ventilation slots free of dust and dirt.
If the dirt is stubborn, use a soft cloth dampened
with soapy water.
Never use solvents like petrol, alcohol,
ammonia, etc. These solvents may damage the
plastic parts.
Maintenance
Our machines are intended to function for a long
time with minimal maintenance. Permanent
satisfactory functioning can be obtained with
appropriate maintenance of the appliance and
regular cleaning.
In order to maintain the battery's capacity, we
recommend discharging the battery completely once
per month then fully recharging. The blower should
only be stored when the battery is fully charged. In
the case of prolonged storage, recharge the battery
periodically. Store the blower in a dry environment
protected from freezing temperatures; the
temperature must not exceed 40 °C.

Advertisement

Table of Contents
loading

Table of Contents