Using Picture Modes - NEC MultiSync ME501 User Manual

Using Picture Modes

There are different picture modes available. These picture modes have also been configured with settings as described in the
"Picture Mode Types" table below.
To change picture modesN:
Press the PICTURE MODE button on the wireless remote control to cycle through the modes, or select the mode in the
[PICTURE] list in the OSD menu.
These picture modes are available based on the selected input:
• For [DisplayPort], [HDMI1], [HDMI2], [Media Player], [COMPUTE MODULE]*
➙ ➙
NATIVE RETAIL
* : This input is available when the optional Raspberry Pi Compute Module Interface Board and Raspberry Pi Compute Module are installed. See
1
Picture Mode Types
PICTURE MODE
NATIVE Standard setting.
RETAIL Bright, vivid colors ideal for advertising and branding.
CONFERENCING Lower color temperature and optimized for natural human complexions.
HIGHBRIGHT Maximum backlight brightness with higher color temperature for brighter ambient environments.
TRANSPORTATION Maximum backlight brightness with high contrast to read text under all conditions.
CUSTOM Customizable settings.
NOTEN:

Changing any of the settings of the [PICTURE] in the OSD menu will change the settings for the current input only.
➙
CONFERENCING HIGHBRIGHT
, [OPTION]
1
➙
TRANSPORTATION
PURPOSE
English−45
➙
CUSTOM
page 73.